China Custom Heat Resistant Elevator Double Sided Timing V Belt with Hot selling

Merchandise Description

*A lot of varieties of rubber belts,free of charge time to get in touch with me please,many thanks!

PU Flex Timing Belt/PU Genuinely Unlimited Timing Belt
*Polyurethane belt loop power,by a unique thermoset molding approach.
*High-good quality polyurethane material resistant to put on the belt and tear tesistant appropriate ties.
*A single of the main wire to improve belt toughness,tensile stregth,so that the belt has very good dimensional stability.
*Polyurethane electricity ring with tiny tolerances,can ensure the accuracy of thickness and size.
*All of the previously mentioned features make the ployurethane ring has a higher energy with the bodily and chemical security.
Polyurethane belt has the pursuing qualities:
*Mechanical properties                                                                *Chemical homes
 Positive match,synchronous,running                                                   Resistant to aging,h2o resolution,UVUVA,anti-ozne
 Constant length,no post-elongation                                              Working temperature:-30ºC-80ºC(short time could 
 Low noise                                                                                      withstand 110ºC)
 Wear resistant                                                                               Resistant against simple oils,fat and petrol
 Low-maintenance                                                                          Resistant to some acids
 Highly versatile
 Belt speeds up to 80m/s

This spherical PU timing belt especially             
ideal for lower load synchronous transmission,
such as:office automation technique and house appliances.

Connected Belt

one.Ring belt from the continuous steel main and the thermoplastic polyurethane material,is a real no interface ring belt.
two.Ring belt to guarantee the attributes and procedure beneath large load,this energy transmission belt for substantial-pace and high load transfer.
three.Ring belt length may possibly be from 1.seven-hundred to 22.000 meters.
four.Ring belt can be custom-made in accordance to customer’s specs of distinct models,these kinds of as:AT20,AT10,T10,T5,AT5,HTD8M,STD8M…..
*Ring belt specific processing:
  1.Tooth floor and nylon material
  2.Can be rolled again a special sample grinding and drilling
  3.can include the again of the belt thicking
About opening belt
*Opening belt completed with a continuous length,the middle and the sides parallel to the wire core.Normal roll duration is fifty or 100 meters.
*Open (PU) CZPT belt with a variety of different main selection,this sort of as kevlar core,highly versatile main(HF)substantial-performance(HP)and higher toughness(HPF)
*Manufacturing tolerance of little reliable transmission and has a dimensional steadiness.The creation approach or in the enamel and tooth incorporate a layer of nylon to guarantee that programs working in the specific characterstics of the exact same.Also thicker layer of polyurethane in the belt or the again of the pink plastic to avert corrosion or higher load.

Model Checklist
*Sorts of design to decide on
MXL

Spec. Enamel Spec. Enamel Spec. Teeth Spec. Teeth Spec. Enamel Spec. Tooth Spec. Teeth Spec. Enamel
26MXL 33 36MXL forty five 37MXL forty six 38MXL 48 41MXL fifty one 46MXL fifty eight 53MXL sixty six 54MXL sixty seven
55MXL 70 56MXL 71 57MXL 72 58MXL seventy three 59MXL seventy four 60MXL 75 61MXL 76 63MXL 79
64MXL eighty two 65MXL eighty three 71MXL 89 72MXL ninety 73MXL ninety two 74MXL ninety three 75MXL 95 76MXL ninety six
77MXL ninety seven 78MXL 98 80MXL 100 81MXL  102   82MXL 103 84MXL one zero five 85MXL 106 86MXL 107
87MXL a hundred and ten 88MXL 112 89MXL 114 92MXL a hundred and fifteen 93MXL 119 94MXL 120 95MXL 121 96MXL 122
97MXL 123 98MXL 124 99MXL a hundred twenty five 100MXL 126 101MXL 127 102MXL 128 105MXL 132 107MXL 134
109MXL 136 112MXL one hundred forty 114MXL 143 115MXL one hundred forty four 116MXL a hundred forty five 120MXL 150 122MXL 153 124MXL 155 
126MXL 157 128MXL a hundred and sixty 132MXL one hundred sixty five 140MXL a hundred seventy five 143MXL 179 144MXL 180 145MXL 181 148MXL 185
150MXL 187 151MXL 189 152MXL a hundred ninety 153MXL 191 154MXL 192 155MXL 193 156MXL 195 160MXL two hundred
168MXL 210 184MXL 230 200MXL 250 204MXL 255 205MXL 256 208MXL 260 348MXL 435 400DMXL five hundred

T10 

Spec. Enamel Spec. Enamel Spec. Enamel Spec. Enamel Spec. Teeth Spec. Enamel Spec. Enamel Spec. Teeth
T10*260 26 T10*three hundred thirty T10*330 33 T10*370 37 T10*390 39 T10*four hundred forty T10*410 41 T10*440 forty four
T10*450 45 T10*460 forty six T10*480 48 T10*500 50 T10*510 51 T10*530 53 T10*540 fifty four T10*550 fifty five
T10*560 fifty six T10*600 60 T10*610 61 T10*620 sixty two T10*630 sixty three T10*650 sixty five T10*660 66 T10*680 68
T10*690 sixty nine T10*700 70 T10*720 seventy two T10*730 seventy three T10*750 seventy five T10*780 78 T10*800 eighty T10*810 eighty one
T10*830 83 T10*840 84 T10*850 eighty five T10*860 86 T10*880 88 T10*890 89 T10*900 90 T10*910 91
T10*920 92 T10*950 95 T10*960 96 T10*970 ninety seven T10*980 ninety eight T10*one thousand 100 T10*1571 a hundred and one T10*1050 one hundred and five
T10*1080 108 T10*1100 one hundred ten T10*1110 111 T10*1140 114 T10*1150 a hundred and fifteen T10*1200 a hundred and twenty T10*1210 121 T10*1240 124
T10*1250 a hundred twenty five T10*1260 126 T10*1280 128 T10*1300 130 T10*1320 132 T10*1350 one hundred thirty five T10*1360 136 T10*1390 139
T10*1400 one hundred forty T10*1410 141 T10*1420 142 T10*1440 144 T10*1450 one hundred forty five T10*1460 146 T10*1500 150 T10*1520 152
T10*1560 156 T10*1580 158 T10*1600 one hundred sixty T10*1640 164 T10*1700 one hundred seventy T10*1750 one hundred seventy five T10*1760 176 T10*1780 178
T10*1800 one hundred eighty T10*1850 185 T10*1860 186 T10*1880 188 T10*1960 196 T10*1980 198 T10*2000 200 T10*2571 202
T10*2100 210 T10*2120 212 T10*2160 216 T10*2170 217 T10*2200 220 T10*2250 225 T10*2500 250 T10*2800 280

H

Spec. Teeth Spec. Tooth Spec. Tooth Spec. Enamel Spec. Teeth Spec. Enamel Spec. Tooth Spec. Teeth Spec. Enamel
200H forty 225H forty five 250H fifty 260H fifty two 270H 54 280H 56 300H 60 315H sixty three 330H sixty six
350H 70 390H 78 420H 84 450H ninety 460H 92 470H 94 480H 96 510H 102 540H 108
560H 112 570H 114 600H one hundred twenty 630H 126 700H 140 750H 150 900H 180        

 T2.5

Spec. Teeth Spec. Tooth Spec. Tooth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Tooth Spec. Tooth
T2.5*a hundred and twenty 48 T2.5*one hundred forty five fifty eight T2.5*a hundred and sixty 64 T2.5*one hundred eighty seventy two T2.5*182.5 73 T2.5*200 eighty T2.5*215 86 T2.5*240 ninety six
T2.5*245 ninety eight T2.5*260 104 T2.5*285 114 T2.5*330 132 T2.5*380 152 T2.5*420 168 T2.5*500 two hundred T2.5*600 240
T2.5*650 260 T2.5*780 312 T2.5*950 380                    

AT5

Spec. Tooth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Enamel
AT5*375 seventy five AT5*390 78 AT5*455 ninety one AT5*490 98 AT5*500 a hundred

AT10

Spec. Tooth Spec. Teeth Spec. Tooth Spec. Tooth Spec. Teeth Spec. Enamel Spec. Tooth Spec. Enamel
AT10*five hundred fifty AT10*600 sixty AT10*660 sixty six AT10*700 70 AT10*730 73 AT10*780 seventy eight AT10*800 800 AT10*840 eighty four
AT10*920 ninety two AT10*960 ninety six AT10*980 98 AT10*1050 one zero five AT10*1080 108 AT10*1100 a hundred and ten AT10*1150 one hundred fifteen AT10*1200 one hundred twenty
AT10*1210 121 AT10*1250 125 AT10*1280 128 AT10*1300 a hundred thirty AT10*1350 a hundred thirty five AT1390 139 AT10*1400 one hundred forty AT10*1480 148
AT10*1600 one hundred sixty AT10*1700 170 AT10*1860 186 AT10*1900 one hundred ninety                

S3M

Spec. Enamel Spec. Tooth Spec. Teeth Spec. Tooth Spec. Teeth Spec. Enamel Spec. Teeth Spec. Tooth
S3M120 40 S3M144 48 S3M150 fifty S3M183 61 S3M192 64 S3M201 67 S3M210 70 S3M231 seventy seven
S3M237 seventy nine S3M246 82 S3M315 105 S3M357 119 S3M418 a hundred and forty S3M420 a hundred and forty S3M432 144 S3M453 151
S3M459 153 S3M486 162 S3M492 164 S3M504 168 S3M510 one hundred seventy S3M513 171 S3M519 173 S3M525 a hundred seventy five
S3M528 176 S3M537 179 S3M543 181 S3M546 182 S3M549 183 S3M555 185 S3M564 188 S3M571 191
S3M573 191 S3M585 195 S3M588 196 S3M600 two hundred S3M612 204 S3M705 235 S3M738 246 S3M780 260
A3M717 239 D3M327 109                        

HTD3M

Spec. Tooth Spec. Tooth Spec. Tooth Spec. Enamel Spec. Tooth Spec. Enamel Spec. Tooth Spec. Tooth
3M135 45 3M144 forty eight 3M171 fifty seven 3M174 fifty eight 3M177 fifty nine 3M189 sixty three 3M195 sixty five 3M207 69
3M225 seventy five 3M228 seventy six 3M243 eighty one 3M255 eighty five 3M264 88 3M276 ninety two 3M288 96 3M294 ninety eight
3M300 a hundred 3M312 104 3M315 one hundred and five 3M324 108 3M336 112 3M345 one hundred fifteen 3M357 119 3M360 120
3M366 122 3M375 125 3M384 128 3M402 134 3M420 140 3M423 141 3M435 one hundred forty five 3M456 152
3M459 153 3M462 154 3M468 156 3M471 157 3M483 161 3M486 162 3M495 a hundred sixty five 3M504 168
3M510 a hundred and seventy 3M522 174 3M525 a hundred seventy five 3M537 179 3M540 180 3M549 183 3M555 185 3M564 188
3M573 191 3M606 202 3M657 219 3M669 223 3M693 231 3M699 233 3M708 236 3M720 240
3M738 246 3M879 293 3M1569 523 3M2040 680                

*We also have product :L/XL/XXL/T5/AT3/H/PK/PJ/PH/DMB/DT5/DR/PL/MB/DAT10/DT10/S2M/S5M/5M/HTD2M/HTD5M/HTD14M/HTD8M,or as your requirment to make new product but need to have to pay out model expense,If you have no amount,noted remember to!

Application 

About organization
ZheJiang CZPT Transmission Tools Co.,Ltd. 
Was established in March 2004,have 16 many years of creation encounter.Nearby in No. 11, Lane 243, Jiugan Street, Sijing Town, Xihu (West Lake) Dis. District, ZheJiang ,China.Major offer in transmission belt and modular chain belt and so forth.manufacturing quantity more than 50000 pieces 1 calendar year.all kinds of rubber material,pvc and pu substance etc.accept specical creating as your requirment. We support custom support.and delivery time most speediest 1day according  to your orders.Companies adhering to the “integrity,quality,cost,and service initial,steady innovation” organization philosophy,focused to provide higher top quality merchandise and substantial-high quality provider for the client,the business continutes to grow the scale of improvement,consumers throughout the place.

If you have interested,totally free time to make contact with me make sure you.

 
 

    
 

The setting in which the roller chain is used and the function it performs will affect which roller chain is employed and how typically you will want to change it. Rest confident that roller chains are one particular of the most efficient and successful alternatives for electrical power transmission and transportation apps. You will find roller chains most typically utilized for mechanical electricity transmission in industrial machinery and item conveyance through producing services. Basic Industries: Foodstuff, Beverage, Resources, Packaging, Automotive, Metals, Building, Mining
Chain pitch: refers to the distance among the hinge middle of one particular chain website link and the hinge middle corresponding to the adjacent chain url. Sprocket Pitch Circle Diameter: The diameter of the circle exactly where the heart of the hinge is when the chain is wrapped about the ball. The hinge centers of the chain and the circles drawn by way of these centers are called pitch circles, and their diameters are known as pitch circle diameters.These chains are utilised to continuously elevate and convey materials at a pace of 2 m/s. There are two sorts of conveyor chains: Removable or hooked chains: This kind of conveyor chain is used for electricity transmission in between conveyors of shorter lengths. Shut chain: composed of the cylinder block and connecting rod, cast and shaped, with higher strength soon after heat remedy.

China Custom Heat Resistant Elevator Double Sided Timing V Belt     with Hot selling