China Good quality Conduit Making/Exhaust Pipe/Shower Hose Making Machine wholesaler

Merchandise Description

Exhaust CZPT Interlock Versatile Metallic Hose Producing Device

1. Product Specifics

What can our machine generate?

1. Round Interlock Hose (2S & 3S)
2. Polygonal Interlock Hose (2S & 3S)
three. Interlock Hose with Yarm
4. Car / Boat Motor Flexible Exhaust Pipe


2. Machinery Parameter

a. Machine No.1:

Machine Type CF-150
Available Form Spherical or polygonal with various forming dies
Dimensions variety ID38-150
Forming speed one hundred fifty-350m/8hrs
Strip thickness .25-.5mm
Strip width sixteen and 20mm
Energy 4KW
Outer dimensions 3500mmX1200X1600mm
Weight 950kgs

b. Equipment No.2:

Device Kind CF-three hundred
Accessible Form Round or polygonal with distinct forming dies
Measurement selection ID150-300
Forming pace 100-200m/8hrs
Strip thickness .twenty five-.8mm
Strip width sixteen,20, 28, 32mm
Energy 11KW
Outer proportions 3500mmX1200X1600mm
Fat 1200kgs

c. Other Types’ Parameter


Generating dimension/mm ID38-one hundred fifty ID75-three hundred ID200-400 ID38-65
Pace M/H 100-one hundred twenty a hundred and fifty-400 100-a hundred and twenty a hundred and fifty-400
Strip size /mm sixteen-twenty*.twenty five-.5 twenty*.45m 28*.5-.8 fifteen*.25
Type Polygonal Round spherical polygonal

3. Machine Instruction

Principal: the device included sophisticated technologies, the universal wheels and 4 pairs of forming wheels will be applied to form the hose action by action. The measurement of the interlock hose will be very same as forming mold.
1. 7 pairs of wheels are all transmission wheels (refers to wheel drawings), the very first pair of wheel is positioning (refers to wheel drawing 001).They can not be pressed also tough to stop too fast feeding.The allowable tolerance in equally sides can not be much more than .3mm. The third pair are folding wheels(refers to drawing 3),the folding diploma of asymmetry will not be much more than .3mm. The fourth pair folding & shaping wheel(refer to wheel drawing 004), the strip will be folded and shaped to be 90° angle. The fifth pair (refer to drawing 5) will make 90° angle strip 60° angle.
two. Soon after the strip goes by means of 7 pairs of wheels, wind and repair the strip on the forming mould, and then push the slot step by stage with seven pressing wheels. Operate the machine slowly and gradually until the correct hose comes out.
three.The transmission wheels have been adjusted before supply from the manufacturing facility.

When modifying the 4 middle urgent wheels, remember to note: the very first pair can not be too restricted, then the second will be tighter than initial, the other will be by the exact same way.
The turning course of heart pressing wheels:

Modifying Method:
The seven pairs of wheels(1-7) will be positioned with spacers, the upper wheel need to be in the same centre line with decrease wheel, do not repair them. There are spacers inside decrease wheels which have been adjusted just before shipping. The spacers outdoors the wheels will be pressed by the nuts. The spacers of different thickness will be employed to make certain the reduce wheel just in the centre of the strip and equally sides folded equally. The 5 pairs of wheels have to be pressed down parallelly with same drive. Make certain the strips are not destroyed when pressing down the wheels.
Do not fasten the nuts on the urgent instruments to keep the spring within can go freely.
You want to place gasket when it is necessary to make restricted interlock hose.
When change the transmission wheels, it is necessary to unfastened all wheels, and then permit the wheels drop down freely and then fasten.
Maintain the length among pressing wheel help and the huge plate of the device 1.5mm 1 than another clockwise.(for 3-s device, it will be 1.0mm)
Routine maintenance:

  1. Include the grease in the chain wheel and chain just before begin-up and hold the shaft and chain are greased correctly.
  2. Run the device with uniform pace, in no way speed up or reduce the pace suddenly. When commence up the equipment, the pace must be significantly less than 400r/min and max. pace need to not be far more than 800r/min.
  3. Reduce off the electrical power source when the equipment is not operating.
  4. Fasten the nuts on the wheels and quit them from sliding and maintain examine to make certain.

four. Company Overview

Comflex Industrial Co.,Ltd

We supply all types of equipment relevant to hoses, bellows, and material growth joints with a lot more than 35 years. Meanwhile, we can also design and manufacture specific tools according your special prerequisite. Our equipment have been exported to a lot of international locations, such as Ukraine,Russia, Viet Nam, India, Canada, Australia, Italy, France, British isles, Turkey, etc.. We CZPT you extended-expression mutual advantageous cooperation partnership!

five. Application

Exhaust hose generating equipment are extensively used to manufacturing exhaust pipe or flex connectors for the truck. Compared with interlock ASS hose, the 3-s hose has the subsequent features:

  • Minimal leakage
  • Better sealing performance
  • Versatile
  • Exhaust connector, Exhaust pipe for the truck.
    Industrial flexible metal hose generating.
  • SS & sss variety, spherical & polygonal kind



Produce speed/hr

Strip size(width*thickness)







two hundred




two hundred




a hundred and fifteen




one hundred




one hundred




one hundred



45,fifty one,55mm 








89,ninety five,102mm



6. Packing & Supply

seven. Client Pay a visit to

8. Certification

FAQ for interlock hose making machine

Q:Why choose us as your supplier?
A:We are most professional in flexible conduit making machine with more than 30 Years’ experience

Q: What can you supply for flexible conduit making machine?
A: Interlock hose making machine
    Squarelock hose making machine
Q:What sizes you machine can make?
A: Interlock Hose:ID3-ID450 on different machines

We need to know the following information to quote you correct machinery:

Q:What type of flexible conduit you need?
A:For instance, square lock or interlock hose, please send us profile drawing or picture to us.

Q:Hose size range
A:Such as:DN8-DN200

Q:Material of hose
A:Such as: Stainless steel (304,316L)/Galvanized steel

Q:Product type
A:Spherical/Polygonal interlock hose

Chain pitch: refers to the length amongst the hinge heart of a single chain website link and the hinge center corresponding to the adjacent chain hyperlink. Sprocket Pitch Circle Diameter: The diameter of the circle the place the centre of the hinge is when the chain is wrapped about the ball. The hinge facilities of the chain and the circles drawn via these facilities are called pitch circles, and their diameters are referred to as pitch circle diameters.These chains are used to repeatedly raise and convey content at a pace of 2 m/s. There are two varieties of conveyor chains: Removable or hooked chains: This kind of conveyor chain is utilised for electricity transmission among conveyors of shorter lengths. Closed chain: composed of the cylinder block and connecting rod, forged and formed, with substantial strength following heat treatment.
Uncover the roller chain at EP, which has a broader waist plate to aid carry heavier masses on conveyor belts, wire rod devices, printing presses and a lot of other industrial programs. Roller chains are totally interchangeable and pre-lubricated to help minimize elongation. Decide on one or riveted chains with zinc and aluminum coatings to support prevent rust and chemical corrosion.

China Good quality Conduit Making/Exhaust Pipe/Shower Hose Making Machine     wholesaler